How To Turn Water Off In Bathroom Tub

Y'all only came in from a difficult day at work and you are ready to get into your oasis to soak. The water is at the level you need and y'all turn the bathtub faucet. Nevertheless, the bathtub faucet won't turn off! Don't panic, but if the bathtub faucet won't plough off, shut off the h2o supply in the home. What could cause this to happen? Let's find out how to turn the main water supply off, and what the causes could be for this to happen. Also, some home maintenance while you are investigating these areas, and when to phone call a professional.

Why You lot Demand to Know What to Do If the Bathtub Faucet Won't Turn Off

In a situation similar the above, you demand to know where the primary water close-off valve is located. In homes with a basement, it is usually located on an interior wall almost the front of the house and close to where the h2o meter would be. However, if your habitation is congenital on a slab, the master water shut-off valve is usually located in the garage nearly the hot water heater or it may be in the thou. Likewise, turning off the water supply is essential to avoid flooding the dwelling house.

The Bathtub Faucet Won't Plough Off: Causes

Valves Need Replacing

The valves control the flow of the water and when they wear out, ofttimes they demand replacing. Contacting a professional person is recommended as the valves will need to exist taken out of the wall and replaced. This is not an like shooting fish in a barrel task for someone who is unfamiliar with this blazon of plumbing result.

The Faucet Handle is Damaged

Sometimes the problem is the handle is damaged. This handle has a stem in the within and allows the h2o to catamenia upwards through the faucet and then out into the bathtub. Nevertheless, if the handle is cracked, it won't grip the stem and you lot won't be able to turn the h2o off and so replacing is the only choice.

Bathtubs that have two handles are easier to take off and replace. More than modernistic handles though possibly a fiddling more than tricky. If you need assistance, contact a professional to aid you.

Steps for Fixing the Faucet

i. Grab gloves and goggles to be safe before you start working.

2. Make certain the valve to the main water supply is turned off. Every bit stated earlier, this is either in your basement or garage.

3. Take your phone with you lot and have a picture of the faucet and handles. This is because it will be easier to explain to the plumber the problem. In add-on, it will be helpful for you to find replacement handles at the local hardware shop or become on Amazon.

iv. Grab a apartment-blade screwdriver and pry underneath the cover plate and reveal the handle screw. Utilise a Phillips screwdriver to tighten the handle screw.

5. Turn the valve to the water main back on and plough the faucet on and off to see if this fixed the issue. Yes? awesome! If not, bummer, and go along reading!

Fixing the faucet didn't work next temporarily fix the stem

Fixing the Faucet Didn't Work? Next, Temporarily Set up the Stem

1. Plough off the principal water supply once more. Remove the handle by turning information technology to the right and it should come off the stalk. You may need to use a wrench or a gentle pull for this to happen.

2. Look at the faucet stem for whatsoever issues. In the stem are ridges and if the ridges are worn downwardly, and then there is nothing to grab a hold of the faucet.

three. Apply an old toothbrush and make clean out the droppings and any deposits and wipe the stalk dry.

4. You will need thread seal record and wrap a couple of layers around the valve stem tip. And so, take the handle and press it in over the stalk through the record. Another mode is to only rotate the handle over the stalk and allow it to lock into place.

v. Remember this is just a temporary ready and may last a month or upwards to two years, but you will need to supersede the faucet handle.

While you lot are working on a gear up for the faucet handle, y'all might have other home improvement ideas that pop into your head. In that location are also other maintenance bug you tin tackle such as:

Other Maintenance in the Bathroom

Sink Trap

You might detect that there is a stench coming from the drain in the tub. This can be the P trap is dry and every bit a issue, is allowing the sewer gases to escape. You lot will want to fix this right away.

Mold Growing in the Bathtub

This would too be a good fourth dimension to make clean the bathtub well. Wait at the white silicone, exercise you encounter mold growing on it? Take the time to clean this earlier it becomes worse and see if there is a leak well-nigh it that needs to be recaulked.

Toilet

Check the flooring near the toilet and run into if information technology leaks any h2o at the base there could be a loose seal or caulking that you need to fix.

When to Call a Professional

Call a professional person if y'all aren't certain why the bathtub faucet won't plough off or need plumbing services. It could be a number of reasons as listed above, merely you can always consult a professional for help.

Determination

It tin exist frustrating non being able to turn off the water in the bathtub and having to shut off the main water supply. With this in heed, attempt the steps above or consult a professional for help. We have a look at bathtub and bathroom faucets when we are conducting home inspections in New Hampshire and Southern Maine.

Recall you might need 1 of our services? Comment below!